Authentic Eleaf iStick Pico 85W Tank VM 25 Box MOD Kit 5.00 1

Buy Authentic Eleaf iStick Pico 85W Tank VM 25 Box MOD Kit

1-85W / 1*18650 / zinc alloy/ Tank-25mm / 3ml. Coil:1.0 ohm /0.6 ohm Color: as the photo.

In stock

Authentic Eleaf iStick Pico 85W Tank VM 25 VW TC APV Box Mod KIT

1-85W / 1*18650 / zinc alloy/ Tank-25mm Capacity - 3ml.

Coil: 1.0 ohm /0.6 ohm You can order ...

Color: as the photo.

Resistance range: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW mode)


  • MOD

COLOR Silver: Silver Black


Power & Batteries



BATTERY TYPE Interchangeable



  • Authentic VM 25 Sub Ohm Tank

Tank-25mm Capacity - 3ml.

Coil: 1.0 ohm EUC CCELL Coil (10-14W);

0.6 ohm EUC MESHED Coil (16-22W)

Thread: 510

Size: 25mm x 51mm

VM tank uses the most up-to-date CCELL coil for an even more consistent flavor and nicotine delivery.

Also a completely new revolutionary tea fiber composite with the meshed coil. Easy to replace and top fill, gives you a completely mess-free vaping experience.

The Vaporesso VM 25 Sub Ohm Tank adopts two coils,

CCELL coil for Nic salts/CBD and tea fiber meshed coil for free base e-juice.

The top refill system and bottom AFC of VM Tank helps you acquire pure and dense flavor with thick clouds.

Each set contain:

1pc VM TANK 25

1pc EUC CCELL 1.0ohm coil (Pre-installed)

1pc EUC MESHED 0.6ohm coil

1pc Glass Tube

1pc User Guide

1pc Warranty Card

3pc 〇-Ring

  • Details MOD:

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. With a compact size, you can hold it in the palm, much more convenient for usage and portability.

Variable wattage: 1-85W

Maximum charging current: 2A

Maximum output current: 50A

Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode

Resistance range: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW mode)

Big 0.91'' screen with optional interfaces: The iStick Pico 25 features a big 0.91'' screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

High compatibility: The iStick Pico 25 can handle various tanks up to 25mm diameter.

2A quick charge capability: With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly.

Upgradeable firmware with preheat function: Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.

Dual circuit protection: The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.

510 threading connection

Powered by 1*18650 battery (not included)

Continuous discharge current should be above 25A

Functions of micro-USB port: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

The power and brains behind this phenomenal kit is the robust Eleaf iStick Pico 25 MOD. As is the case with the entire Eleaf iStick collection, this exceptional device is expertly engineered, masterfully designed, and furnished with a chip that affords an impressive array of features and capabilities. Available in multiple gorgeous color combinations, the iStick Pico 25 MOD is as beautiful as it is well-performing.

The body and frame of the Eleaf iStick Pico 25 MOD is constructed with premium aluminum-zinc alloy. Although aluminum and zinc are the primary components of this metal, it is also blended with various other materials, including magnesium and copper, collectively delivering characteristics that are ideal for devices such as performance Eleaf MODs. As a result, the iStick Pico 25 is incredibly strong, sturdy, and enduring, while remaining surprisingly light in weight. The spring-loaded, self-adjusting contact pin is made with 304-grade stainless steel, and automatically adjusts in order to provide a secure connection between the iStick Pico 25 and any tank you wish to use with it.

One of the primary capacities afforded by the Eleaf iStick Pico 25 MOD is its variable wattage functionality. By employing the operation buttons located at the top of the device, this phenomenal MOD permits you to regulate the amount of power that is released to the atomizer. You can set the Eleaf iStick Pico 25 to unleash wattage as low as 1W and as high as a hefty 85W, in 0.1W increments. This wide range of power at your fingertips enables you to pair the iStick Pico 25 with atomizer coil resistances between 0.1 ohms and 3.5 ohms.

In addition to your ability to fine-tune the iStick Pico 25 MOD’s output power, this exceptional device also affords you the ability to regulate the atomizer coil’s temperature as well. When used with an atomizer containing a nickel, titanium, or stainless steel coils, you are able to adjust and set the temperature of the coil itself. In doing so, you will be permitted to customize the temperature of the produced vapor, while concurrently eliminating the possibility of dry or burnt hits.

The face of the Eleaf iStick Pico 25 Box MOD features a state-of-the-art OLED screen, which very clearly and vividly displays a vast array of critical data, all of which is designed to help you monitor and operate your device efficiently and conveniently. By pressing any of the MOD’s buttons to activate the screen, you can digitally view the temperature setting, the output wattage the output voltage, the output current, the resistance of the atomizer coil, the remaining battery life, and any errors that may arise while the iStick Pico 25 is being used. This vast range of chief information available to you at all times ensures easy and optimal performance.

Eleaf judiciously designed the iStick Pico 25 to accommodate a single external 18650 battery (sold separately). Compared to devices containing a permanent internal battery, the iStick Pico 25’s removable battery offers certain critical advantages. Due to the fact that all rechargeable batteries will be unable to contain a charge after a certain number of cycles, once this inevitably occurs with internal-battery devices, you will be forced to discard the entire unit, whereas the iStick Pico 25 affords you the ability to replace solely the battery itself. This is, of course, a substantially less costly option. Furthermore, the capacity to interchange batteries also enables you to carry charged spares with you in case the one in use dies while you’re out and about.

In addition, Eleaf engineered the iStick Pico 25 MOD with firmware upgradability, which helps keep your device up-to-date. Utilizing the included cable, you can effortlessly connect the iStick Pico 25 to any computer and download the most recent firmware version, as it is released by the manufacturer. In doing so, you can ensure that your device is always kept current with the most recent technologies and bug fixes.

DEPTH 25 mm

HEIGHT 70.5 mm

WIDTH 48 mm


1*iStick Pico 25 Mod

1* VM 25 Sub Ohm Tank

1*User Manual,

1*USB Cable

Categories: ​E-Cigarette Box Mod Third-generation

Tags: E-Cigarette Box Mod Kit Vaporesso iStick Pico 85W Vaporesso VM 25

Authentic Eleaf iStick Pico 85W Tank VM 25 Box MOD Kit reviews

Average customer rating: (1) 5.00 out of 5 stars

  • Very impressed with this little mod!!
    By May 14, 2020 21:26

    I run temp control most the time and it works as well (Or better) than all my other mods
    Despite being so small it houses 25mm atty's no problem!
    I take this with me when im out and about as its so tiny and easy to conceal it makes for a wicked ninja vape.
    Plus, the best Tank with Coil 0,6om!

Read all 1 review on Authentic Eleaf iStick Pico 85W Tank VM 25 Box MOD Kit